Wire thermal spray coating machine, arc thermal spray coating machine
Arc thermal spray coating machine (SX-400w) is a high-efficiency and low energy consumption machine we develop. It uses the heat generated from electricity arc to melt metal wires, and pulverizes and cools down the molten wire with compressed air, then spray the pulverized metal particles to preprocessed surface at a high velocity to get a perfect coating.
Arc thermal spray coating machine do the coaitng applications:
Anti-corrosive coating for steel structure of steel tower, bridge, water shutter, vessel and so on.
Surface repair work of work pieces such as paper-making dryer, printing roller, bent axis.
Electrode spray in capacitance and electric porcelain fields.
It can spray on metal, wood, paper, floor, plastic, ceramic surface etc .
Arc thermal spray coaitng machine can spray materials
Arc thermal spray coating machine can spray all kind of metal wires, such as Alloy wire, Zinc, Aluminum, Copper, Stainless steel, Iron wire, etc.
Wire size: It can spray the wire size from diameter 1.6 ~ 3.0mm.
Arc thermal spray coating machine consists of arc spray gun and electricity power supply, with air compressor and wire feeder as accessories. It uses integrative electro-gas switch to make operation simpler and suitable for aerial work and fieldwork in a long distance.
It is consists of spray power supply and spray gun, with air compressor, air filter and wire feeding shelf as accessories. It uses integrative electro-gas switch to make operation simpler and suitable for aerial work and fieldwork in a long distance. The velocity of pulverized particles reach 420m/s especially up to 600m/s in axis airflow, and the coating deposition rate is above 75%.
Advantages of arc thermal spraying coating process
1. Wear Protection against
Erosion
Fretting
Galling
2. Corrosion Protection against
Oxidation
Hot gas corrosion
Atmospheric corrosion
3. Thermal Barrier coating
4. Recycle the products (Repair the worn-out parts)
5. Prolong product use life
6. Rebuilding of under size parts
7. Electrical conductivity
Arc thermal spray coating machine main parameters
| Spray material |
Wire diameter |
Working current |
No-load volt |
Air hat diameter |
Max. spray efficiency |
| Zinc wire |
1.2-3.0 |
80-210 |
18-30 |
6-8 |
30 |
| Al wire |
1.2-3.0 |
120-240 |
25-38 |
6-8 |
9.5 |
| Steel wire |
2.0 |
150-200 |
35-40 |
7-8 |
6 |
| High carbon steel wire |
2.0 |
150-220 |
10-44 |
8 |
5.5 |
| Stainless steel wire |
2.0 |
150-220 |
10-44 |
8 |
5.5 |
| Zn-Al, Pb-Sn alloy wire |
1.2-2.0 |
80-110 |
18-28 |
7 |
|
| Air pressure |
Input power supply |
Output efficiency |
Output no-load volt |
Power supply weight |
Regulating volt |
| >0.5Mpa |
Three phase 380V,50HZ |
16KW |
18-44V |
178kg |
0-24V |
| Spray gun weight |
Air pressure |
Air consumption |
Wire feeding gravitation |
Velocity regulating range |
Input velocity |
| 2.65kg |
>0.5Mpa |
>1.85m3/min |
>8kg |
stepless speed regulating |
≤24V(DC) |
Voltage of the thermal arc spray coating machine: We can supply the 220V, 380V, 415V and 440V 3 phase 50/60Hz thermal arc spray coating machine.
Color of the thermal arc spray coating machine: If you did not like the color of green or gray, you can choice the color you want it.
After service: we can dispatch the engineer to your factory for the machine installation and worker training.
For further information pls contact with me. Thanks!
| Item |
Info. |
| Cell phone |
+86 135 3991 0944 |
| QQ |
9536 75701 |
| |
|
| |
|
| |
|
